NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
6.2.0 upgrade problems on RN104
Since upgrading my RN104 to 6.2.0 I've had similar problems to those listed by other users: - Unable to shutdown or reboot. Display shows appropriate message and power button LED flashes, but noth...
Time for a frustrating progress report. The backup finally finished yesterday and I removed the offending drive and thoroughly tested it with HD Tune, which reported no errors. I put it back in the NAS and decided to stick with JBOD to start with, so I could try filling up the drive again to see what happens before I commit to starting from scratch with RAID. I also upgraded to 6.2.2 after starting up the NAS. I hit two problems with re-adding the drive:
1 - I tried naming the new JBOD volume Cygnus4 the same as it was previously, only to be told this name is already in use (despite the drive having being formatted) so I had to call it Cygnus_4. Maybe I should have destroyed the volume before removing the drive?
2 - If I try to create a shared folder on this drive I get "Folder operation failed. 1013060008 Cannot get UID for Guest." Rebooting the NAS hasn't helped, so I am now stuck. I might try reinstalling the firmware again this evening after work.
1 - I tried naming the new JBOD volume Cygnus4 the same as it was previously, only to be told this name is already in use (despite the drive having being formatted) so I had to call it Cygnus_4. Maybe I should have destroyed the volume before removing the drive?
2 - If I try to create a shared folder on this drive I get "Folder operation failed. 1013060008 Cannot get UID for Guest." Rebooting the NAS hasn't helped, so I am now stuck. I might try reinstalling the firmware again this evening after work.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
