NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNas Duo v2 - Windows 7 Doesn't See It
Hi
Since changing my router I can no longer see my ReadyNas on my Network. RAIDar sees it on the old IP address - 192.168.1.74 but when I click Setup or Browse the webpage that pops up doesn't loa...
rozel wrote:
I think I know the UNKNOWN IP address in my router (I believe this is the Duo's) - it is 192.168.0.7
First try confirming this by entering https://192.168.0.7/admin in your browser, and see if that gets you into the duo's dashboard.
rozel wrote:
Yes my Duo is definately v2 and had thought I did a Firmware reinstall earlier this morning but not sure I followed the right procedure. Can you point me to or tell me what the exact procedure is please - definately a v2 Duo, running 5.3.5 soft.
If your duo has a static 192.168.1.x address, then the simplest solution is to change your router to use 192.168.1.x also.
I didn't want to post the boot menu procedure until the model was confirmed. It's described on pages 16-17 here: http://www.downloads.netgear.com/files/GDC/RND2110/ReadyNAS_Duov2_NV+v2_HW_en_23-Mar-12.pdf
rozel wrote:
I understand about doing a Factory reset - that's a complete no no as I've thousands of music tracks on it, which I don't want to lose.
RAID isn't enough to keep your music safe. You need a backup on a different device for that. So I do recommend getting a USB drive or some other storage, and putting a backup plan in place for your NAS.
While I agree with bedlam1 that you should update your firmware, I wouldn't do that until after you have a backup.
rozel wrote:
I think I know the UNKNOWN IP address in my router (I believe this is the Duo's) - it is 192.168.0.7
First try confirming this by entering https://192.168.0.7/admin in your browser, and see if that gets you into the duo's dashboard.
rozel wrote:
Yes my Duo is definately v2 and had thought I did a Firmware reinstall earlier this morning but not sure I followed the right procedure. Can you point me to or tell me what the exact procedure is please - definately a v2 Duo, running 5.3.5 soft.
If your duo has a static 192.168.1.x address, then the simplest solution is to change your router to use 192.168.1.x also.
I didn't want to post the boot menu procedure until the model was confirmed. It's described on pages 16-17 here: http://www.downloads.netgear.com/files/GDC/RND2110/ReadyNAS_Duov2_NV+v2_HW_en_23-Mar-12.pdf
rozel wrote:
I understand about doing a Factory reset - that's a complete no no as I've thousands of music tracks on it, which I don't want to lose.
RAID isn't enough to keep your music safe. You need a backup on a different device for that. So I do recommend getting a USB drive or some other storage, and putting a backup plan in place for your NAS.
While I agree with bedlam1 that you should update your firmware, I wouldn't do that until after you have a backup.
"I didn't want to post the boot menu procedure until the model was confirmed. It's described on pages 16-17 here: http://www.downloads.netgear.com/files/GDC/RND2110/ReadyNAS_Duov2_NV+v2_HW_en_23-Mar-12.pdf "
This did the trick - a massive thank you! Not used my Duo for a while but my Media Player, so I'm informed, now plays music, which in turn will hopefully now deliver lossless sounds through my Home Theatre setup.
Strange thing is the relevant IP address is now 198.162.0.26 lol! But my network now sees it and that's what matters. It still shows 192.168.0.7 as UNKNOWN but now I am going to have a well deserved session with my Media Player. I've just updated the Duo to 5.3.13 too - not sure what the enhancements are but we will see.
Thank you once again and have a great day!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
