NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS nv+ won't power up after outage. Power Supply Problems?
Hello My ReadyNAS NV+ (Product: ReadyNASRND4000, Serial Number: 23J3027700C11) was originally purchased in November 2010. In June 2016 I had a problem with the power supply: The NAS wouldn't start u...
Yup. You can test that it turns on the supply with it disconnected before you do it with it connected. You'll know the supply came on because the fan will run.
If it works, you likely won't want to leave it that way, but it's a way to get the data off the NAS.
It's fairly easy to modify a 24-pin to 20+4 pin ATX extender/adapter to power the NV+ from an ATX supply. It's more than just using the adapter, though, you need to swap some pins.
Thanks! I've found a few threads relating to how to do the adaptation of the 24-pin ATX PSU connector. Is there one you recommend?
Thanks again for your help.
Les
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
