NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Synchronisation offline after RN104 upgrade to 6.10 from 6.9.5
After upgrading to 6.10, Readycloud no longer synchronises ... "Synchronisation Offline".
In the NAS admin page,, ReadyCloud is switched on, shows "Internet Available" and "Services Available" som...
Fixed. This is the second major software glitch with this device that needed significant effort on my part to fix. I don't know what someone with no tech skills would do in this cuircumstance.
Anyway, ended up buying an external drive; backing everythng up; and doing a factory reset Restoring all the files now, but it definitely does synch again. Cost $200 for an external drive I don't need and I lost of good chunk of two weekends with a couple of evenings thrown in. At the expense of time with family.
LeapingLemming wrote:
I have also checked other settings and they all look OK. The services show HTTP and HTTPS off, eveything else on.
HTTP and HTTPS should be turned on in system->settings->services.
Where were you looking?
Exactly where you say and I can't turn them on for some reason. I click on them and the pop-up has all options greyed out.
FYI as for network settings, IP4 has a static IP, IP6 is disabled.
LeapingLemming wrote:
Exactly where you say and I can't turn them on for some reason. I click on them and the pop-up has all options greyed out.
And they have no green stripe going through them?
Of course you can reach the NAS admin, so one of them has to be working.
No green stripe through HTTP or HTTPSSee above, no green stripe through either ... and yes I get to NAS admin, but HTTPS must be working because even though greyed, it is 'ticked' as on
Also got desperate and removed then rediscovered the device. No luck there either.
LeapingLemming wrote:
See above, no green stripe through either ... and yes I get to NAS admin, but HTTPS must be working because even though greyed, it is 'ticked' as on
That is weird. You say you've tried over-installing the firmware. Perhaps try an OS reinstall?
That isn't quite the same, and has some side effects - it will
- reset your network configuration to use DHCP
- turn off volume quota
- reset the admin password to password
Data shouldn't be affected. Instructions are on pages 28-29 of the hardware manual. http://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_%20OS6_Desktop_HM_EN.pdf
Another thing you could try is to log in via ssh, and uninstall the apps that use php.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
