NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNas + link aggregation?
Hi
This is a small business situation. Currently 10 clients, a few servers and other wired components (and mixture of other devices.)
Mixture of Draytek kit for WAN and wireless. Netgear JGS5...
Personally I'd upgrade the switch and use LACP.
weirdbeardmt wrote:
1) Bond 2 (or more) interfaces in the ReadyNAS, put these in to my current switch and use either Round-Robin or Adaptive Load Balancing and this should provide some tolerance / performance without requiring anything new
Round-robin should only be used if you can configure a static LAG on the switch. There are some switches that support static LAGs, but don't support LACP.
The two modes that don't require special switch support are ALB and TLB. Sometimes these modes will misbehave, so be on the look out for that.
Thanks for that. I found the equivalent Netgear version: https://kb.netgear.com/23076/What-are-bonded-adapters-and-how-do-they-work-with-my-ReadyNAS-OS-6-storage-system
If I've understood correctly, then I could, either:
1) Bond 2 (or more) interfaces in the ReadyNAS, put these in to my current switch and use either Round-Robin or Adaptive Load Balancing and this should provide some tolerance / performance without requiring anything new
2) As above, but invest in a better switch to use the e.g., IEEE LACP version
With that being the case, I'm inclined to go for (1) and stay with what we've got for now.
So next question... how do I choose between RR and ALB?
Personally I'd upgrade the switch and use LACP.
weirdbeardmt wrote:
1) Bond 2 (or more) interfaces in the ReadyNAS, put these in to my current switch and use either Round-Robin or Adaptive Load Balancing and this should provide some tolerance / performance without requiring anything new
Round-robin should only be used if you can configure a static LAG on the switch. There are some switches that support static LAGs, but don't support LACP.
The two modes that don't require special switch support are ALB and TLB. Sometimes these modes will misbehave, so be on the look out for that.
FWIW, I posted a new topic on options for adding new switches. Your thoughts would be appreciated.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
