NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Readynas 102 extremely slow after update to 6.4.1
I have a Readynas 102 system with 2 2TB discs. there is about 230 GB of data on the discs. Yesterday I updated to 6.4.1, as suggested in the administration page. After that the system is extremely sl...
What firmware are you running?
Is the antivirus service enabled.
I have a ReadyNAS 316 with 6x4TB in RAID 5, since upgrading to 6.4.1 the the RAID is crippled down to around 5-10MB/s
I never had antivirus turned on and its not on.
I upgraded to 6.4.1 several days ago and never thought much of it, but then I started to see some problems with accessing files over samba, at first I thought the newly upgraded Windows 10 system was to blame so after testing on another PC and after ruling everything else out I realized the probem was related to the ReadyNAS FW update.. (5 days after upgrading to 6.4.1) I downgraded back to 6.4.0 hoping it would solve the problem only to realize that this it did not, performance still suffered, So moving forward I am back at 6.4.1..
At first I thought the problem was samba, but after running direct disk benchmarks I noticed the problem effects all disk operations.
RAID5
Timing buffered disk reads: 24 MB in 3.62 seconds = 6.62 MB/sec
Sansdisk flash drive connected to USB3 port
Timing buffered disk reads: 162 MB in 3.01 seconds = 53.77 MB/sec
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
