ReadyNas 102 update 6.10.6

Question

HiI have been trying to update from 6.10.3 to 6.10.6 without success.I have tried it both ways, letting the system update by itself and I have tried it manuallyI have restarted the ReadyNas and it just won't update. I have enough space and it displays as being healthy.&nbsp;I would appreciate someone providing some information on I should do to update the NAS.Thank You&nbsp;MarioCurrent Version: 6.10.3New Version: 6.10.6Image Size: 74.7 MB

StephenB · Answer

Can you download the log zip file from the logs page?
&nbsp;
Then check the OS partition fullness (not the same as the volume fullness).&nbsp; Open volume.log, and scroll down to the df -h section
=== df -h ===
Filesystem      Size  Used Avail Use% Mounted on
udev             10M  4.0K   10M   1% /dev
/dev/md0        4.0G  645M  3.0G  18% /
tmpfs           3.9G     0  3.9G   0% /dev/shm
The /dev/md0 line is the OS partition.&nbsp; Generally it is less than 25% full.
&nbsp;
Right under that is the df -i section (that gives info on free inodes).&nbsp; Generally the % used is abouut 1%.
&nbsp;
Let us know what you see.
&nbsp;

ibrujo · Answer

Hi&nbsp;StephenBThank you for your reply and help.I followed your instructions, however, I do not see "df" nor "df -h".I am attaching an alphabetical list of the logs for your review.Any suggestions?Thank You&nbsp;Mario&nbsp;

StephenB · Answer

ibrujo&nbsp;wrote:
&nbsp;
I am attaching an alphabetical list of the logs for your review.
&nbsp;

There are a lot more after http.

&nbsp;

ibrujo · Answer

HiI found it, this is what it says:=== df -h ===Filesystem Size Used Avail Use% Mounted onudev 10M 4.0K 10M 1% /dev/dev/md0 4.0G 3.9G 0 100% /tmpfs 249M 0 249M 0% /dev/shmtmpfs 249M 35M 214M 14% /runtmpfs 125M 1.4M 123M 2% /run/locktmpfs 249M 0 249M 0% /sys/fs/cgroup/dev/md127 2.8T 1.4T 1.5T 49% /data/dev/md127 2.8T 1.4T 1.5T 49% /apps/dev/md127 2.8T 1.4T 1.5T 49% /home/dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Backup/dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/BI_Storage/dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Documents/dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Downloads_Folder/dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Music/dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Pictures/dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/readydrop/dev/md127 2.8T 1.4T 1.5T 49% /var/ftp/Videostmpfs 4.0K 0 4.0K 0% /home/mmartinez/snapshot=== df -i ===Thank youMario

StephenB · Answer

ibrujo&nbsp;wrote:
&nbsp;
=== df -h ===Filesystem Size Used Avail Use% Mounted on/dev/md0&nbsp; &nbsp;4.0G 3.9G&nbsp; &nbsp; &nbsp;0 100% /

Reformatted slightly so the columns line up.
&nbsp;
The OS partition is full.&nbsp; If you already know how to use the linux command line, it is possible to fix this yourself.
&nbsp;
But if you don't know how to use ssh, then it would be best to contact Netgear support, and have them fix it remotely.&nbsp; They will require you to purchase a service contract - no idea what that costs, perhaps&nbsp;JeraldM&nbsp;can give you guidance on exactly what contract you will need and current pricing for your geography.
&nbsp;

Forum Discussion

ReadyNas 102 update 6.10.6

10 Replies

Related Content

OS 6.10.6 on Pro6

READYNAS RN102 OS6 bloque apres upgrade firmware 6.10.6=>6.10.7

readynas 516 (6 baies) : impossible d'updater le firmware. HELP !

ReadyNAS 214 - Update error message

ReadyNas 526 Firmware 6.10.10 Plex update

NETGEAR Academy

ProSupport for Business