NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Readynas 104 drops out when copying to it
I have a readynas 104 configured with four 4tb drives in raid 5. I've managed to copy about 6tb onto the device without issue but now whenever I go to copy something onto the box, lets say a single 4...
Hi,
Same thing here.
RN104 4x4tb disks x-raid, firmware 6.1.3.
When it reached the 70% utilization and started sending alerts, after while copy
was almost not possible. Now it is not possible. It starts copying at a relative high
speed, then it drops to few bytes/second and then stops responding.
This is completely unacceptable. The disks i have are in the supported list.
Just noticed a firmware update to 6.1.4, but in the release notes there is nothing
about for this major problem.
If there is a problem with this high capacity, just wondering why it is not mentioned
by Netgear.
We all paid for the RN104 (bit too much, i would say) and for the 4tb disks. They are not ......freeware!
:( :( :(
Same thing here.
RN104 4x4tb disks x-raid, firmware 6.1.3.
When it reached the 70% utilization and started sending alerts, after while copy
was almost not possible. Now it is not possible. It starts copying at a relative high
speed, then it drops to few bytes/second and then stops responding.
This is completely unacceptable. The disks i have are in the supported list.
Just noticed a firmware update to 6.1.4, but in the release notes there is nothing
about for this major problem.
If there is a problem with this high capacity, just wondering why it is not mentioned
by Netgear.
We all paid for the RN104 (bit too much, i would say) and for the 4tb disks. They are not ......freeware!
:( :( :(
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
