NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS 104 LCD Error: "Cannot connect discovery server"
It seems to work fine, but this cosmetic problem covers up the name/IP on the LCD and keeps the LCD lit which will burn it out sooner than would be ideal. This is on a ReadyNAS 104 running firmware 6...
Thanks for the prompt reply.
Firstly, as stated, my network is setup in a static configuration, DHCP is NOT an option. Secondly, to clarify, the Netgear interface (eth0) is setup as follows:
Configure IPv4: Static
IPv4 Address: 192.168.1.199
Subnet Mask: 255.255.255.0
Router: 192.168.1.254
Configure IPv6: Disable
Any other suggestions?
Firstly, as stated, my network is setup in a static configuration, DHCP is NOT an option. Secondly, to clarify, the Netgear interface (eth0) is setup as follows:
Configure IPv4: Static
IPv4 Address: 192.168.1.199
Subnet Mask: 255.255.255.0
Router: 192.168.1.254
Configure IPv6: Disable
Any other suggestions?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
