NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNas 104 stuck booting
Hi All,
My readynas 104 is stuck booting at about 60% "Systemd-Update-U" on the LCD display.
I have tried the following:
1. OS-Reinstall
2. Factory Reset
3. USB recovery
4. Changed disks
All with the same result. I can login via telnet in "Tech Support Mode", and was wandering is there is a command that I can force a factory reset. It almost feels its not completely resetting.
I was running 6.9.2 and have updated via USB recovery to 6.9.3, and that didnt help either.
I can see the device in Raidar when is started booting saying "system is starting" but then disapears when it gets further into the boot process.
Thankyou in advanced.
This should be fixed now (Successfully completed USB Boot Recovery should have also been able to resolve this).
Also the system time of your system had been set back to 1925 for some reason. That should be fixed as well.
2 Replies
Replies have been turned off for this discussion
Sounds like you could have had a partially completed update, perhaps with a different firmware loaded onto the disks than the firmware used by the early boot process and the kernel.
This should be fixed now (Successfully completed USB Boot Recovery should have also been able to resolve this).
Also the system time of your system had been set back to 1925 for some reason. That should be fixed as well.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
