NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS 2100 LACP & GS724TS Switch
I am trying to setup LAG for my ReadyNAS 2100 and my GS724TS switch but every-time I try and get it going I lose all connectivity to the NAS.
I setup LAG on the switch and set the mode to LACP but on the NAS it keeps asking me for a xmit_hash_policy: Layer2, Layer2+3, Layer3+4 which is not even an option on my switch.
I need to load balance across both NICS to the switch to allow for as much bandwith as possible.
Also note that the NAS must be on VLAN 150.
Any help would be very much appreciated!
I setup LAG on the switch and set the mode to LACP but on the NAS it keeps asking me for a xmit_hash_policy: Layer2, Layer2+3, Layer3+4 which is not even an option on my switch.
I need to load balance across both NICS to the switch to allow for as much bandwith as possible.
Also note that the NAS must be on VLAN 150.
Any help would be very much appreciated!
1 Reply
Replies have been turned off for this discussion
- These forums are for the ReadyDATA devices. Please ask about this on the ReadyNAS forums: http://www.readynas.com/forum
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
