NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
kalpsr
May 26, 2023Aspirant
Readynas 31400 Booting Issue
https://community.netgear.com/t5/Using-your-ReadyNAS-in-Business/Readynas-31400-Booting-Issue/m-p/2240900#M196804 replying to this after long time. I have done factory reset, OS Re-install also ...
StephenB
May 29, 2023Guru - Experienced User
kalpsr wrote:
When I start the NAS first time, it is being stuck at Booting...
Then I do power off and start it again, it will boot normally.
Please provide some other solution.
Does this happen every single time you power up the NAS?
Have you ever seen it happen when you simply restart it (leaving it powered)?
Have you tried running the diagnostics from RAIDar?
kalpsr
May 29, 2023Aspirant
Does this happen every single time you power up the NAS?
As I observed, It is happening when the NAS is powered of without normal shutdown.
Have you ever seen it happen when you simply restart it (leaving it powered)?
No. Issue is not happening when doing normal shutdown and restart.
Have you tried running the diagnostics from RAIDar?
Ran the test. Showing not any error.
- StephenBMay 29, 2023Guru - Experienced User
kalpsr wrote:As I observed, It is happening when the NAS is powered off without normal shutdown.
Actually I'm not seeing that in either thread. You said
When I start the NAS first time, it is being stuck at Booting...
Then I do power off and start it again, it will boot normally.
I don't see anything about how the NAS was shutdown before the failure to boot, and I don't see anything that says whether this happens 100% of the time.
I am asking this: When you power down the NAS with the preferred shutdown, does it always fail to fully boot when you start it up again? Or does it sometimes boot normally?
- kalpsrMay 29, 2023Aspirant
When you power down the NAS with the preferred shutdown, does it always fail to fully boot when you start it up again?
Yes always, with Booting... message only.
Then i will have to power off manually by pressing power button.
Or does it sometimes boot normally?
Once in a while it boots normally.
- StephenBMay 29, 2023Guru - Experienced User
Also, can you connect the NAS hdmi port to a monitor before you boot it up? There might be some clues on the screen if you do that.
Related Content
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!