NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS 6.6 on 204 - stop working :-(
Hi to everyone. I received a bad news today. I wnt back to home and I found the readynas freezed with a "_309 out of memory" in the LSD. I transfered a lot of file with RSYNC from the 204 (backup j...
Out of Memory would suggest a memory leak of some kind. I have sent you a PM.
I'm going to read it. Thanks.
PS: If there's a way, I can reset the NAS and configure it again in few minutes. My priority is to retain the data on disks (6 TB).
Does it come up fine if you boot it into volume read-only mode (a boot menu option)?
If so can you download the logs and send the zip file in (see the Sending Logs link in my sig)I tried the the boot in "OS install", but the boot stopped at 95%. Freezed.
I removed all the disks, and started again: it went on. I entered in the web admin, I turned on the SSH and launch an "apt-get update".
I switched off the NAS.
I put all the disks inside, closed, turned ON and after a minutes it freezed but with a new error message:
do_exit+890
Now, If I boot with disks, it freeze after more or less, 1 minute.
If I boot without disks, I can read an error message in the LCD:
ERR: no disks detected.
I really don' know what else to do :-(
After more than 8 hours of memory test (passed!) I tried to start the NAS.
It wrote DO (my volume's name) Degraded.
Then, it started to recovery the disk 4 with the light flashing on disk 4 and on the close light.
But after 20 minutes, the percentage was the same (0,00%), so I turned off.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
