NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNas Duo cannot select PC folder to backup, gives "error connecting to..."
Hi, I am trying to configure my ReadyNAS model RND2000 ver 1 with firmware 4.1.6 to backup some folders in my PC's running windows 7 pro. I was able to do it on one PC but the second PC must have a ...
cboudet wrote:I am using the admin account without a password, as the computer has no password to log in.
That could be the problem. I know Win10 won't allow you to access files or remotely connect with an account without a password, even using an account without one. I just don't recall if Win7 has that limitation. Maybe try creating an account with a password and see if that login works for "everyone" files.
I wanted to add some information.
After reading all suggested posts, I am going to try to set up a backup with the format recommended in the help, and run it even though it gives the "error connecting to..." message.
If it works, it means the backup part of the software is faulty and should have been fixed by Netgear.
I'll post again after the backup runs.
Thanks
Received notification that backup failed,
will keep searching for a solution.
If the second PC is running Windows 10, you probably need to turn on SMB1. It's off by default in Win10, but not Win7, and would only be on if you had another reason to enable it. Your older NAS does not support more recent versions of SMB.
You said 4.1.6 firmware in your earlier post. Did you mean that, or did you mean 4.1.16?
Also, did you try using the IP address instead of the PC name? That often works more reliably.
You should check the sharing permissions of the PC's DATA share, and also check the file/folder permissions on /data/Images
One thing you could easily do is use something like FreeFileSync on the PC instead of using the NAS backup job. Then FreeFileSync would do the backup (using the NAS share as its destination). If the PC is a laptop, then one benefit of running the backup on the PC is that you don't need any network shares on the PC. That eliminates the chance of inadvertent sharing when you are using a wifi hotspot or hotel network.
StephenB
StephenB wrote:You said 4.1.6 firmware in your earlier post. Did you mean that, or did you mean 4.1.16?
Also, did you try using the IP address instead of the PC name? That often works more reliably.
You should check the sharing permissions of the PC's DATA share, and also check the file/folder permissions on /data/Images
One thing you could easily do is use something like FreeFileSync on the PC instead of using the NAS backup job. Then FreeFileSync would do the backup (using the NAS share as its destination). If the PC is a laptop, then one benefit of running the backup on the PC is that you don't need any network shares on the PC. That eliminates the chance of inadvertent sharing when you are using a wifi hotspot or hotel network.
Sorry, you are correct, it is 4.1.16The folders are shared in the PC with permissions to read/write for everyone.
I have PC's not laptops, and I am trying not to use additional software.
Thanks
Sandshark wrote:If the second PC is running Windows 10, you probably need to turn on SMB1. It's off by default in Win10, but not Win7, and would only be on if you had another reason to enable it. Your older NAS does not support more recent versions of SMB.
It is a windows 7 Pro PC and I cannot find SMB1 anywhere on itThanks
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
