NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Duo not mounting LVM volume?
I'm not exactly sure what's going on, but that's my theory. SYMPTOMS: My Duo won't boot with either (or both) of my drives in it. It will boot fine with no drives. (I had two 500GB Seagate drives ...
First - NO ReadyNAS is supposed to boot without at least one drive. Think of the flash memory as a typical OS install disk, the OS that the unit operates from is on the drives. No drives, no operating OS.
Second - In order to trigger the firmware re-install, the unit must be off and you must depress the micro switch behind the small hole on the back with a straighten paper clip while pressing the power button. You must hold the micro switch depressed until the first long (1 sec) flash of the lights at about 5 seconds. Do not hold for much longer. Here is the link to the instruction: http://www.readynas.com/?page_id=5029
Second - In order to trigger the firmware re-install, the unit must be off and you must depress the micro switch behind the small hole on the back with a straighten paper clip while pressing the power button. You must hold the micro switch depressed until the first long (1 sec) flash of the lights at about 5 seconds. Do not hold for much longer. Here is the link to the instruction: http://www.readynas.com/?page_id=5029
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
