NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
clblackman
Nov 21, 2015Aspirant
ReadyNAS Duo v1 OS Reinstall questions
From my previous post: I have purchased another seagate 2tb drive and was able to install the os the drive from disc 1 slot. So I have eliminated that the controller for the Duo has gone bad. I ha...
clblackman
Jan 03, 2016Aspirant
This was a great site but I can't reach it anymore.
BrianL2
Jan 03, 2016NETGEAR Employee Retired
Hi clblackman,
Does the device still show up in RAIDar? Could you try to do a ping via cmd? Also, check if you can access https://192.168.1.61/admin/.
Kind regards,
BrianL
NETGEAR Community Team
- mdgm-ntgrJan 03, 2016NETGEAR Employee Retired
An OS Re-install won't necessarily fix corrupt root. It does depend what caused it.
If you have corrupt root due to a full 2GB root volume for example, then doing an OS Re-install may actually make your problems worse.
Do you have a backup?- clblackmanJan 16, 2016Aspirant
I do not have a backup of my raid.
What are my options if the device is full?
- StephenBJan 16, 2016Guru - Experienced User
It'd be helpful if you answered Brian's questions:
Does the device still show up in RAIDar? Could you try to do a ping via cmd? Also, check if you can access https://192.168.1.61/admin/.
- clblackmanJan 16, 2016Aspirant
The Duo shows up in RAIDar 6.0 while it is starting up.
Drive 1 has a red X
Drive 2 has a green check mark
Once it seems to have started up I can no longer see it in RAIDar or on my router.
- StephenBJan 16, 2016Guru - Experienced User
Try powering down the NAS and see if it boots with disk 1 removed.
If it does, then back up your data right away.
You could then test the drive 1 with seatools in a Windows PC.
- clblackmanJan 16, 2016Aspirant
Thank you for the quick answer.
I have pulled disc 1. The Duo has been booting for about 30 minutes now. RAIDar 6 gives me the same System Starting up message.
Drive 1 has a red x (it's not there so that's not a surprise.)
driver 2 has a check mark.
The power button led is pulsing. About 2 pulses per second.
The duo had been doing this with both drives installed. I never reached at started duo.
I will be back later and check.
Thank you for the help so far.
I have also downloaded seatools and will attempt that from a windows machine later.
Related Content
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!