Forum Discussion
ReadyNas Duo V1 update to 4.1.14 failed Frontview.
Hi all.
I had a Duo set up and running well (as well it could since its a Duo) and logged in to Frontview.
Got a message that i had a update to install 4.1.14, installed that, all worked well, got the restart nas to complete the update, did that.
All is well so far, i can see all shares, i can access it thru ssh (winscp), i can access my installed apps (sabnzb / Sickbeard / transmisson) without problem.
BUT i can not access Frontview, ERR_CONNECTION_REFUSED is what i get.
Any ideas how to fix this? I do not want to start over since i have a lot of configuring to do in that case.... :(
Best regards
// Hans
I had a Duo set up and running well (as well it could since its a Duo) and logged in to Frontview.
Got a message that i had a update to install 4.1.14, installed that, all worked well, got the restart nas to complete the update, did that.
All is well so far, i can see all shares, i can access it thru ssh (winscp), i can access my installed apps (sabnzb / Sickbeard / transmisson) without problem.
BUT i can not access Frontview, ERR_CONNECTION_REFUSED is what i get.
Any ideas how to fix this? I do not want to start over since i have a lot of configuring to do in that case.... :(
Best regards
// Hans
15 Replies
Replies have been turned off for this discussion
# df -h
# df -i
# tail -n 20 /var/log/frontview/error.log- /$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hdc1 1.9G 640M 1.3G 33% /
tmpfs 16k 0 16k 0% /USB
/dev/c/c 1.8T 102G 1.7T 6% /c
/c/media 1.8T 102G 1.7T 6% /home/ftp/media
/c/tv-series 1.8T 102G 1.7T 6% /home/ftp/tv-series
/$ df -i
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/hdc1 128000 15663 112337 13% /
tmpfs 7073 1 7072 1% /USB
/dev/c/c 60981248 7925 60973323 1% /c
/c/media 60981248 7925 60973323 1% /home/ftp/media
/c/tv-series 60981248 7925 60973323 1% /home/ftp/tv-series
/$ tail -n 20 /var/log/frontview/error.log
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
[Sun Jun 07 10:51:48 2015] [warn] RSA server certificate CommonName (CN) `192.168.2.26' does NOT match server name!?
PHP Fatal error: Unable to start curl module in Unknown on line 0
[Sun Jun 07 11:01:34 2015] [warn] RSA server certificate CommonName (CN) `192.168.2.26' does NOT match server name!?
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
[Sun Jun 07 11:02:13 2015] [warn] RSA server certificate CommonName (CN) `192.168.2.26' does NOT match server name!?
PHP Fatal error: Unable to start curl module in Unknown on line 0
[Sun Jun 07 11:26:45 2015] [warn] RSA server certificate CommonName (CN) `192.168.2.26' does NOT match server name!?
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/get_handler.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/get_handler.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/get_handler.pm line 2.
[Sun Jun 07 11:27:23 2015] [warn] RSA server certificate CommonName (CN) `192.168.2.26' does NOT match server name!?
PHP Fatal error: Unable to start curl module in Unknown on line 0
Sorry for NOT posting logs.. My bad.. i'm a moron.. :-) - Have you tried installing your add-ons over the top of themselves to see if that helps?
- No, since I can't access frontview it's a bit hard to do that.
- You can install them via SSH:
# cd /tmp
# mkdir temp123
# cd temp123
# wget url
# ls
# dd if=filename.bin | tar -xv
# sh install.sh - Ok, will try..
- Hi again.
i have tried re-install 1 by 1 and test if the frontview comes up and no luck there. No Frontview access.Hoa-nas-Duo:~# tail -n 20 /var/log/frontview/error.log
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
Bad free() ignored (PERL_CORE) at /frontview/lib/Frontview.pm line 2.
[Mon Jun 08 21:14:03 2015] [warn] pid file /var/log/frontview/apache-ssl.pid ove rwritten -- Unclean shutdown of previous Apache run?
[Mon Jun 08 21:14:03 2015] [notice] Apache/2.2.6 (Debian) mod_ssl/2.2.6 OpenSSL/ 0.9.8e DAV/2 PHP/5.3.29-0rnx1 mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8 .8 configured -- resuming normal operations
[Mon Jun 08 21:16:28 2015] [notice] Graceful restart requested, doing restart
apache-ssl: Could not reliably determine the server's fully qualified domain nam e, using 192.168.2.26 for ServerName
[Mon Jun 08 21:16:40 2015] [notice] Apache/2.2.6 (Debian) mod_ssl/2.2.6 OpenSSL/ 0.9.8e DAV/2 PHP/5.3.29-0rnx1 mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8 .8 configured -- resuming normal operations
[Mon Jun 08 21:18:17 2015] [notice] Graceful restart requested, doing restart
apache-ssl: Could not reliably determine the server's fully qualified domain nam e, using 192.168.2.26 for ServerName
[Mon Jun 08 21:18:42 2015] [notice] Apache/2.2.6 (Debian) mod_ssl/2.2.6 OpenSSL/ 0.9.8e DAV/2 PHP/5.3.29-0rnx1 mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8 .8 configured -- resuming normal operations
[Mon Jun 08 21:19:31 2015] [notice] Graceful restart requested, doing restart
apache-ssl: Could not reliably determine the server's fully qualified domain nam e, using 192.168.2.26 for ServerName
[Mon Jun 08 21:19:48 2015] [notice] Apache/2.2.6 (Debian) mod_ssl/2.2.6 OpenSSL/ 0.9.8e DAV/2 PHP/5.3.29-0rnx1 mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8 .8 configured -- resuming normal operations
[Mon Jun 08 21:22:00 2015] [notice] Graceful restart requested, doing restart
apache-ssl: Could not reliably determine the server's fully qualified domain nam e, using 192.168.2.26 for ServerName
[Mon Jun 08 21:22:14 2015] [notice] Apache/2.2.6 (Debian) mod_ssl/2.2.6 OpenSSL/ 0.9.8e DAV/2 PHP/5.3.29-0rnx1 mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8 .8 configured -- resuming normal operations
[Mon Jun 08 21:23:27 2015] [notice] Graceful restart requested, doing restart
apache-ssl: Could not reliably determine the server's fully qualified domain nam e, using 192.168.2.26 for ServerName
[Mon Jun 08 21:24:00 2015] [notice] Apache/2.2.6 (Debian) mod_ssl/2.2.6 OpenSSL/ 0.9.8e DAV/2 PHP/5.3.29-0rnx1 mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8 .8 configured -- resuming normal operations
[Mon Jun 08 21:28:15 2015] [notice] caught SIGTERM, shutting down
Hoa-nas-Duo:~#
// Hans - That PHP add-on is an old version. Can you try the latest version of the add-on?: https://rnxtras.com/addons/php-5-4-readynas-4-sparc
Which add-ons do you have installed? - I have:
Php, myphpadmin, sqlon, sickbeard, sabnzb, transmission, couchpotato...
some more I can't remember.
can check when Im home again.
Sent from my phone. mdgm wrote: That PHP add-on is an old version. Can you try the latest version of the add-on?: https://rnxtras.com/addons/php-5-4-readynas-4-sparc
Which add-ons do you have installed?
seems to solved the problem.
strange since i was running the old prior to the update.
Thanks for the as always great support!!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
