NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNas NV+ / corrupt root & no option for raid
Hello All, I just recently purchased a diskless ReadyNas NV+ and am running into some issues. 1st issue is. I put in a 1TB (on the hardware list) drive. the Nas booted fine and was able to get i...
The default is X-RAID. During the initial setup, you have 10 minutes to change the settings using RAIDar (see http://home.bott.ca/webserver/?p=425 on how to change it to FlexRAID 0, 1 or 5).
You can check the setting by using RAIDar and hovering over the "Volume" column or going into Frontview and looking at the main screen. In the example below, you can see that my 6-bay Pro is configured for X-RAID2, it's redundant and has 1490 GB used of 2287 GB (65%):
As for problem #2, I also suspect a bad disk. Try following these instructions for testing: http://home.bott.ca/webserver/?p=388
You can check the setting by using RAIDar and hovering over the "Volume" column or going into Frontview and looking at the main screen. In the example below, you can see that my 6-bay Pro is configured for X-RAID2, it's redundant and has 1490 GB used of 2287 GB (65%):
As for problem #2, I also suspect a bad disk. Try following these instructions for testing: http://home.bott.ca/webserver/?p=388
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
