NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS NV+ seen in RAIDar but can't browse or enter setup
Hello, I have a ReadyNAS NV+ with 4 drive bays. I am using it at present with two hard disks running in X-RAID. Everything was working fine till yesterday. Today I wanted to copy some data from...
Is this a NV+ (v1 - silver chassis) or NV+ v2 (charcoal chassis)
You could use the boot menu: http://www.readynas.com/kb/faq/boot/how_do_i_use_the_boot_menu
You may wish to try an OS Re-install before resorting to doing a factory default. An OS Re-install leaves data intact whereas a factory default does not.
If you do do a factory default and the NAS is a v1 that is not running 4.1.7 or later, update the firmware to 4.1.8 or 4.1.10 beta and do another factory default.
You could use the boot menu: http://www.readynas.com/kb/faq/boot/how_do_i_use_the_boot_menu
You may wish to try an OS Re-install before resorting to doing a factory default. An OS Re-install leaves data intact whereas a factory default does not.
If you do do a factory default and the NAS is a v1 that is not running 4.1.7 or later, update the firmware to 4.1.8 or 4.1.10 beta and do another factory default.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
