NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
OldManAndHisNAS
Dec 15, 2017Aspirant
ReadyNAS NV+ Won't Boot
As of this mornig, I couldn't connect to my NAS. Looks like it was trying to reboot and it gets to 33.7% and hangs. Before it gets to that point, I can find it with RAIDer, but I can't connect to i...
msq
Dec 15, 2017Apprentice
Based on manual (here) and my experience - OS reinstall cold help and it is not affecting the data.
See the manual, page 16
OS reinstall Reinstalls the firmware from the internal flash to the disks. Use the OS reinstall boot mode when the system crashes and corrupts some configuration files. OS reinstall boot mode also resets some settings on your unit, such as Internet protocol settings and the administrator password, to defaults.
OldManAndHisNAS
Dec 15, 2017Aspirant
Thank you for the response. Unfortunately I tried that when I was looking at the Skip Volume Check option.
Display showed "Updating FW" or something like that and then it started booting again.
Got to:
Booting....
FS Check: 33.7%
and then stopped again.
Any other ideas??
- msqDec 16, 2017Apprentice
Being in your shoes I think I will give a try to 'Skip volume check'. Your data should be safe.
Skip volume check After a system crash, the system tries to scan and fix the volume using a file system check. If several problems are found on a disk, this process can stall, causing the system not to boot. Use this option to skip the scan and let the system boot.
- StephenBDec 16, 2017Guru - Experienced User
You could also have a filling OS partition (in which case an OS reinstall would make the problem worse, not better).
Skipping the volume check is safe.
- OldManAndHisNASDec 19, 2017Aspirant
Can't get it to boot into Skip Volume Check mode.
When I hold reset button down and start, it immediate goes into F:Reinstall Firmware mode. When it finishes that it goes into Booting... FS check: up to 33.8% and hangs.
I never get the option on the display to hit the Backup button and change modes to get to Skip Volume Check mode or any other mode.
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!