NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS OS 6.10.5. Connect to Admin page for a few second, after: "Connecting to the ReadyNAS Admin
Hello. NetGear RN10200 ReadyNAS OS 6.10.5 Problem: connects to the admin page for only a few seconds, then the message: "Connecting to the ReadyNAS Admin Page" The system is fully operation...
StephenB wrote:
StephenB wrote:
There is apparently a hot-fix out there, but I don't think it's being pushed through the Netgear update servers just yet.Sandshark has reported that he's gotten the hotfix, so it is being pushed now.
aleksey_bobrov: you might just try rebooting your NAS, and see if it picks up the hotfix.
Thank you. I installed hotfix and it works
aleksey_bobrov wrote:
NetGear RN10200
ReadyNAS OS 6.10.5
Problem: connects to the admin page for only a few seconds, then the message: "Connecting to the ReadyNAS Admin Page"
Lots of people have already reported this.
Try using Chrome, and enter https://nas-ip-address/admin (using the real NAS IP address). The https bit is important.
thanks, I'll try
StephenB wrote:
aleksey_bobrov wrote:
NetGear RN10200
ReadyNAS OS 6.10.5
Problem: connects to the admin page for only a few seconds, then the message: "Connecting to the ReadyNAS Admin Page"Lots of people have already reported this.
Try using Chrome, and enter https://nas-ip-address/admin (using the real NAS IP address). The https bit is important.
StephenB wrote:
aleksey_bobrov wrote:
NetGear RN10200
ReadyNAS OS 6.10.5
Problem: connects to the admin page for only a few seconds, then the message: "Connecting to the ReadyNAS Admin Page"Lots of people have already reported this.
Try using Chrome, and enter https://nas-ip-address/admin (using the real NAS IP address). The https bit is important.
I tried, unfortunately, the same thing
aleksey_bobrov wrote:
I tried, unfortunately, the same thing
StephenB wrote:Try using Chrome, and enter https://nas-ip-address/admin (using the real NAS IP address). The https bit is important.
You can also try an OS reinstall from the front panel (don't do a factory default) Instructions start on page 20 here: https://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_%20OS6_Desktop_HM_EN.pdf
That will change the admin password back to password, which should let you log in. It will change a couple of other settings
- The network will be set back to the default setting (DHCP)
- Volume quota (on the volume settings wheel) will be turned off.
You can then downgrade back to 6.10.3 or 6.10.4 (before you change the password).
There is apparently a hot-fix out there, but I don't think it's being pushed through the Netgear update servers just yet.
The hotfix is going live. My sandbox NAS now shows it's at 6.10.5 Hotfix 1. But since it never had the problem, I can't say if this fixes it.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
