NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS OS 6.5.1 broke my RN10400
I am not sure if anyone else ran into this problem but I just updated my RN10400 from 6.5.0 to 6.5.1 and when it powers on it almost right away gives a boot from usb failed message. Because of this I...
I tried all 13 USB sticks I had around the house and they all did not work and I was not able to get to the boot menu with or without a disk. I did purchase a new RN214 and after setting it up with a blank disk was able to move my 4 disk over to the new NAS without a problem. Then I happen to use the disk that I used to setup my new NAS and moved it to my broken NAS and what do you know. When the disk was setup from a good NAS now my broken NAS started to boot and did update from 6.5 to 6.5.1. So far it been working without a problem.
The RN104 booted ok from the HDD, then the flash was updated properly...
That seems to confirm that the flash wasn't updated properly and that none of the 13 USB sticks worked for the USB boot recovery! :O
That seems to confirm that the flash wasn't updated properly and that none of the 13 USB sticks worked for the USB boot recovery! :O
Hello ekeck,
That's good to know it got fixed.
Thanks for sharing the steps you took. We greatly appreciate your contribution.
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
