NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Pro 2 - no access
Hi, I have suddenly lost access to the data on my ReadyNAS Pro 2. I can log in via the Web admin interface, but all file sharing protocols are off and can not be turned on. The situation seems simi...
Well, the original post was suggesting that you use the procedure here: http://onlyblueatwork.wordpress.com/2012/12/04/net
gear-readynas-access-recovery/ followed by mdgm's suggestions after you clean the OS partition
# cd
# sync
# umount /mnt
# mdadm --stop --scando you have a backup?
Hi Mike,
Looks like you are using OS 6. I did not upgrade to that. So while the causes may be similar my issue looks different. I can not enable any protocols and the share list has disappeared.
/Andy
Thanks.
I am proper stuck ! here...
Looks like i need to back my data up and whipe my NAS and maybe format my disc
Mike
andy-b, this thread might be helpful: https://community.netgear.com/t5/Legacy-NETGEAR-and-Partners-Add/Screwed-sshd-Service/td-p/878508
You could also get per-incident support from Netgear.
StephenB,
this looks promising but when I try to install Enable Root SSH Access from http://kb.netgear.com/app/answers/detail/a_id/24551
I get "Update file is not valid for this architecture."
Is this the right one or this a misleading error message?
/Andy
Andy - I thought you did not have web ui access. That is why I linked in a procedure using tech support mode - which doesn't need you to enable ssh.
If you do have web ui access, then you want the add-on for x86 for 4.2.x firmware. A direct link is here: http://www.downloads.netgear.com/files/ReadyNAS/ADDON/4.2(X86)/EnableRootSSH_1.0-x86.bin
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
