NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNas pro 6 memory test error 999
Hi!
Anybody here that knows what Memory Test result error code 999 means?
It is from a ReadyNas Pro 6 that won't boot right. (Boot Meny works fine though.)
I let Memory Test run over nigh...
Hi Jens3
It seems that it's the number of errors found after doing Memory tests. If it has errors, most likely the memory is failing or is already in a bad shape.
Replacing the RAM will surely help though NETGEAR does not warrant/support that procedure, If you want if you can still somehow get the logs you can send it to us we might be able to confirm through it what is the situation.
Hope this helps!
Regards
Hi Marc_V,
– thank you for your reply!
The unit is probably already very much out of warranty beeing as old as it is, so I wouldn't really hesitate to "break warranty" by replacing RAM. :-)
I'll give that a go, and order new modules right away.
In the meantime, I would be happy to pull the logs off of the unit and send them in for analysis, but which logs should I export? (Or, what command shoud I use to export the right logs via Telnet, when in Tech Support mode? Unit won't boot so I cannot export via web interface.)
I did use the much unofficial instructions at: https://onlyblueatwork.wordpress.com/2012/12/04/netgear-readynas-access-recovery/ to access the unit and to mount md0 so I guess I could get just about anything from there.
Unit is running OS 4.x.x.
Best Regards
/Jens
Hi Jens3
It would be best to download the full logs so we can check.
Have you tried using RAIDar to download the full logs?
On Tech Support mode if correct, you can look at /var/log/ and see if you can get to diagnostic.log, kernel.log, meminfo and system
Regards
After Memory test (30 passes, 999 errors), Disk test (_many_ hours, and passed), a few hours running in Tech support mode, another run of Disk test (aborted at 5% passed) then, finally, the OS Reinstall did work!
So now the unit is up and running and everything seems to be fine.
For how long, though? :-)
I have sent the log files.
Perhaps there are any clues to what may have happened.
Thank you!
Jens3 wrote:
After Memory test (30 passes, 999 errors)
So now the unit is up and running and everything seems to be fine.
999 errors in the memory test says it's not fine. The OS reinstall doesn't affect the memory test software, since it is built into the flash.
Are you running the stock memory, or did you upgrade it at some point?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
