NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Pro6 allways boots on power application
I have both a ReadyNAS 626 and a ReadyNAS Pro6 both using the same power source.
The 626 does not auto-boot upon application of power after power loss, the Pro 6 does.
I have searched the archives and don't see anything which describes how to set the default boot behavior.
My preference is that upon power application the ReadyNAS not boot but be in a state for a Wake On Lan packet to being booting.
Any pointers of where to look to set this behavior are most appreciated!
- Thank you for the update, exactly the information I need.
2 Replies
Replies have been turned off for this discussion
Unfortunately Netgear doesn't provide any options to control power-on behavior after a power cut.
A UPS is one workaround, since it ensures that the NAS does a clean shutdown before the UPS battery runs out. The Pro-6 should then stay off when power is restored.
- Thank you for the update, exactly the information I need.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
