NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Raid 10 Volume Disappeared
Hi I am running a RAID 10 (4 4TB Disks) on a ReadyNAS G214. One of the disks failed. The remaining 3 disks are all fine. The NAS ran in degraded mode while I awaited a new disk. Before the disk ...
SWolfer wrote:
OK, did the restart into read-only boot and sent the logs
I should have also said to remove the 8 TB exos while the NAS was powered down. It's generating a flood of error messages, and isn't even showing up in disk_info.log.
Then boot up, and send me new logs.
FWIW, this isn't looking good. I think you will likely need to try RAID recovery software (like ReclaiMe) - which would also require getting suitable USB dock(s) to connect the disks to a windows PC.
The 8TB disk is not in the NAS
There are 4 4TB disks in, with the disk in slot 1 being the failed disk
Should I remove the failed disk and restart?
SWolfer wrote:
Should I remove the failed disk and restart?
Yes. Then send new logs. My hope (perhaps not likely) is that the NAS will attempt to mount the data volume with it removed.
There's other things going on with the OS partition and the swap partition (also on the disks) which might resolve if the failed disk is removed.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
