NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS RN212 - Only 1 drive appears
I added two brand new 4TB drive to my RN212. I setup the RN212 as though it was new using ReadyCLOUD. The unit appears to be working fine however, when I go to the admin page and look under volumes, ...
I am wondering if there might not be a solid connection between one of the drives and one of the SATA bays? The "now I see it, now I don't" behavior sounds more mechanical than electrical to me.
justinbeck wrote:
I added two brand new 4TB drive to my RN212. I setup the RN212 as though it was new using ReadyCLOUD. The unit appears to be working fine however, when I go to the admin page and look under volumes, I only see a drive in bay 2. Looking at the front of the unit, the bay 2 light is on but the bay light 1 is not. I pulled the drive and put it back in; I heard the drive spin up but the light never lit and the admin/volumes page still doesn't show the additional drive.
Seems like that drive in bay 1 should show and the light should be on on the front of the unit. What's the best way to go about trouble shooting this to ensure everything is working as expected?
You could try powering down, and try removing the disk in slot 1, and shifting disk 2 to slot 1. Then power up, and see if the system boots.
Thanks. I swapped the drives and it still only sees bay 2. Then I pulled the drive it previously had not been able to see (so the drive it WAS seeing, which was in bay 2, is now in bay 1) and rebooted again. In that configuration it doesn't see any disks at all. So it seems like there's something wrong with the chasis itself?
Ths plot thickens. I put everything back the way it was (working drive in bay 2, blank drive in bay 1) and suddenly I see both drives! All I have on there is my time machine backup so I'm going to go ahead and have the ReadNAS format both drives and re-sync. It looks like, once that's done, it'll be in good working order. Anyone have an explanation of what might have happened here?
I am wondering if there might not be a solid connection between one of the drives and one of the SATA bays? The "now I see it, now I don't" behavior sounds more mechanical than electrical to me.
I thought the same but I tried re-seating both drives and it made no difference. For now, it's plugging along without a problem. Seems like I shouldn't touch anything. Thanks for your help!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
