Forum Discussion

Aspirant

Jan 31, 2016

Solved

Readynas Rnd4000 v3 psu died

Hi at all, I'm new on this community

I have a Readynas RND4000 v3 which the psu has gone. Now i'm searching on ebay the model ST-220FUB-05E but it's difficult to find or it is very very expensive.

I know that someone used an ATX power supply from pc, and adapted the wiring to this nas.

Can someone provide the schema?

Thanks,

Andrea

Other Discussions

StephenB
Jan 31, 2016
See sandshark's posting here: https://community.netgear.com/t5/ReadyNAS-Hardware-Compatibility/ReadyNASRND4000-NV-compatible-220V-power-unit/m-p/1042065#M13695

The pinout is here: https://community.netgear.com/ejquo23388/attachments/ejquo23388/readynas-hardware-compatibility/13477/1/ReadyNAS_PSU_pinout.pdf

I suggest getting a short 20-pin extension cable and making the wiring change there.

3 Replies

Replies have been turned off for this discussion

StephenB
Guru - Experienced User
Jan 31, 2016
See sandshark's posting here: https://community.netgear.com/t5/ReadyNAS-Hardware-Compatibility/ReadyNASRND4000-NV-compatible-220V-power-unit/m-p/1042065#M13695

The pinout is here: https://community.netgear.com/ejquo23388/attachments/ejquo23388/readynas-hardware-compatibility/13477/1/ReadyNAS_PSU_pinout.pdf

I suggest getting a short 20-pin extension cable and making the wiring change there.
- Sandshark
  Sensei - Experienced User
  Feb 03, 2016
  StephenB wrote:
  
  I suggest getting a short 20-pin extension cable and making the wiring change there.
  
  I've not tried with an extension, there's not much room for one. Unfortunately, I don't currently have one to try, either.
  - chiarlun
    Aspirant
    Feb 04, 2016
    Thanks a lot for your advices!
    Now i have the wiring schema for a standard atx psu, in the meanwhile i have ordered a new psu from idotpc.com which can sell a new one.
    I'll keep you informed next time!
    Thanks again!
    Bye
    Andrea