NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Ultra 4 BIOS
The last post in this thread says that ReadyAS resolved their problem by changing an option in the BIOS. The ReadyNAS Ultra 4 (RNDU4000) does not have a VGA header on the motherboard. It does have ...
Somehow, BfloEagle 's latest post disappeared. I typed in a reply to that, and trying to post it resulted in "Message not found". Nowq IO posted this, and his is there again,
The situation appears to be a bit different than you described, though the result is the same. The UPS does not "power back on", it has not yet shut down and turns back on the switch to the NAS. Can you simply configure it such that it never turns it off, even if that means plugging it into a different UPS outlet?
If the UPS is basically a combination UPS and PDU, also make sure you have no ping-based reset that may be the culprit.
I'll give it a shot. Not sure if a NUT Master itself can ignore a low battyery signal (override.battery.charge.low = -1 maybe??). It's a raspberryPi so if it does not shut down gracefully, I'm not that worried... Everything else on the UPS will either be shutdown by that point or are not impacted by hard power cuts (switches).
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
