NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNas Ultra 4 stuck on booting (though boot menu is working)
Out of the blue, my ReadyNAS Ultra 4 stopped working. Upon powering off and on again, it is stuck on booting. RAIDar can't find the device, and it does not respond to pings. I can reach the Boot M...
Eventually I used the Netgear USB recovery tool (see here for more: http://home.bott.ca/webserver/?p=166) and that finally did the trick.
I have tested the disks and they seem fine. I've tried to factory reset the ReadyNAS with each disk separately, but the device still does nothing but boot...
Perhaps run the memory test boot menu option for at least a few passes.
So far, I ran two memory tests, both with a 0 error rate. So I guess the issue is not related to the memory...
It's getting even stranger: After running three successful memory tests (i.e. no errors) I tried again to factory reset the device (using just one hard drive). This time, after initiating the reset, the device started to boot but after a few seconds shut down and restarted. It showed the ReadyNAS welcome message and then started to boot again, but aborted booting after a few moments to shut down and restart again. The whole process was repeated five+ times before I shut it down for good, switched the hard drive and tried again. But the same thing (i.e. start of boot process with self-shutdown of devicve and restart shortly afterwards) happened with the new hard drive as well. I'm now running several additional memory tests, though I seriously doubt the issue is memory-related...
Eventually I used the Netgear USB recovery tool (see here for more: http://home.bott.ca/webserver/?p=166) and that finally did the trick.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
