NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNas Ultra bricked after failed ubuntu installation
Against all advice I decided to install Ubuntu 14.04 on my ReadyNas Ultra 2. After an initial struggle, the installation was complete and everything was working fine. That is until I decided to upgrade to 16.04. During the installation, the /boot partition (which sits on the internal flash drive on /dev/sda) got filled up and ran out of space for the required kernel images, the installation failed and the OS refused to boot. To make matters worse the recovery partition was overwritten.
The output I can see via serial is garbage and I can't write anything. I've tried the USB recovery method but it was unsuccessful. At this point I have given up on my data but I was hoping someone would have an idea to get the device out of this bricked state. Any help would be greatly appreciated!
I've sent you a PM.
3 Replies
Replies have been turned off for this discussion
Anyone?
The ReadyNAS is quite particular about the USB flash drives it supports for USB recovery. The only advice I can give is to try other devices -- the older the better.
But the unit serial number and possibly other things important to run the Netgear software are also in flash. So there may be no recovery.
I've sent you a PM.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
