NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNV: Can´t get out the Tray...
Hi Folks, seems to me i´m stupid. Due to a diskfailure i like to replace a HardDisk#2. But I can´t get the Tray out. Tried to push the Button and tried to do it with a paper clip. No latch comes ou...
Just discovered that two on my unlocked trays were stuck. Above instructions, in particular method B worked a treat to release them.
However freeing up the mechanism so a Button press translates to a slide action of the lock mechanism was not so obvious to fix. In the unlocked position A, neither effected tray buttons were pressable even though they worked fine when I set the unit up about a month ago.
I found that cycling the security lock tab several times was the answer. This process requires removing HDD from tray to access the lock tab. Cycling the main release lever did not fix things on either of my effected drives as I suspect the problem is related to the relationship between the button, slider and security lock.
However freeing up the mechanism so a Button press translates to a slide action of the lock mechanism was not so obvious to fix. In the unlocked position A, neither effected tray buttons were pressable even though they worked fine when I set the unit up about a month ago.
I found that cycling the security lock tab several times was the answer. This process requires removing HDD from tray to access the lock tab. Cycling the main release lever did not fix things on either of my effected drives as I suspect the problem is related to the relationship between the button, slider and security lock.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
