NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNV: Can´t get out the Tray...
Hi Folks, seems to me i´m stupid. Due to a diskfailure i like to replace a HardDisk#2. But I can´t get the Tray out. Tried to push the Button and tried to do it with a paper clip. No latch comes ou...
Those images are gone forever. I'm not even sure many of the members from back then are even active any more.
However, if you look at the imate in the post by mdgm on 2/2/12 above, the squareframe (outlined in turquoise) needs to be pushed down (direction of the arrow). This is best by inserting a heavy paper clip that has been straighted in either of the two holes marked "B". If you shine a flash light into the vent holes, you will see the top edge of the square frame in holes. Insert the paper clip (I use a 00 Phillips small screwdriver) over the top edge of the square frame and press down. You can also use the top of the rectangular hole as a pivot point and lift the part of the paper clip that is outside to press down on the square frame. I actually discovered this process before I fount this thread.
However, if you look at the imate in the post by mdgm on 2/2/12 above, the squareframe (outlined in turquoise) needs to be pushed down (direction of the arrow). This is best by inserting a heavy paper clip that has been straighted in either of the two holes marked "B". If you shine a flash light into the vent holes, you will see the top edge of the square frame in holes. Insert the paper clip (I use a 00 Phillips small screwdriver) over the top edge of the square frame and press down. You can also use the top of the rectangular hole as a pivot point and lift the part of the paper clip that is outside to press down on the square frame. I actually discovered this process before I fount this thread.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
