NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Resync progress over 100%
Hi everyone
New dude here..
I've a strange problem that I've never seen before and I don't know what to make of it. I reinstalled my RN4220X and created a RAID10 array using 6x3TB disks and everything looked ok as the volume resyncing was below 100%. But now the resync is still in progress and now it's way over 100% and I don't know why it does this. I've tried to reboot the NAS but it just keeps on resyncing no matter what I do. It works just fine with iSCSI and my VMware hosts but I kind of would like it to finish the resync :) Any thoughs?
I'm runnig version 6.7.4 on it
https://dl.dropboxusercontent.com/u/49903938/RN4220X_Resync_issue.PNG
/Peter
Another customer has just ran into this as well: https://community.spiceworks.com/topic/2006592-netgear-raid-rebuild-over-100?page=1#entry-6985783
5 Replies
Replies have been turned off for this discussion
I've seen some similar cases reported in the past - I suspect it is a reporting issue, and the resync is still running. So I suggest letting it run (hopefully to completion).
Another customer has just ran into this as well: https://community.spiceworks.com/topic/2006592-netgear-raid-rebuild-over-100?page=1#entry-6985783
Thanks..
I looked at /proc/mdstat and sure enough, it says 86% and 200-ish minutes left. I guess I'll just have to wait then :)
Aaaand it's done..
It went up to 300% and I bet there is some "logic" to that number.
Thanks for your replies.
walkera22e wrote:
It went up to 300% and I bet there is some "logic" to that number.
Likely its related to the expansion history (e.g., I am thinking that the volume is comprised of three RAID partitions).
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
