NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RN102 will not accept SMB/CIFS network map requests from any Windows 8.1 machine
After the recent upgrades to 6.5x, I have not been able to map the shares on my RN102. I made sure that the shares have SMB enabled and anonymous access checked. This did not happen before the upgrade. Since this is happening on multiple Windows 8.1 machines on my network, I have to assume the problem is on the ReadyNAS side.
I am able to access the NAS through its IP address on a the web browser and I am able to access it through a DNLA only share I have.
Any Ideas? Using the Windows Diagnose wizard does not reveal any solution on the error code: 0x80070035
Zonker wrote:
yes I'm on 6.5.1 and can access using ReadyCLOUD. The problem is mapping the shares using Windows File Explorer.
I've seen a few of these now, and so far the solution is to add/replace credentials for the NAS in the windows credentials manager.
Try this as a test. Open CMD and enter
net use * /delete
net use t: \\nasipaddress\data /user:admin nasadminpassword
using the real ip address and admin password of course. If you aren't using the default xraid, use the real volume name instead of "data".
First command terminates any open network sessions, and if it prompts let it proceed. The second attempts to mount the NAS data volume as PC drive letter t. Let us know if that works (or how it fails).
15 Replies
Replies have been turned off for this discussion
I'm also noting that LAN access to the NFS shares has come to a complete crawl.. the transfer rates is about 5Mbps whereas my other non-ReadyNAS device is getting 90Mbps on the same switch.
Hi Zonker,
Are you using ReadyCLOUD? If you will use or upgrade to 6.5.1, tell us if you will get the same behavior.
Kind regards,
BrianL
NETGEAR Community Team
BrianL2 wrote:Hi Zonker,
Are you using ReadyCLOUD? If you will use or upgrade to 6.5.1, tell us if you will get the same behavior.
Kind regards,
BrianL
NETGEAR Community Team
Hi Brian,
yes I'm on 6.5.1 and can access using ReadyCLOUD. The problem is mapping the shares using Windows File Explorer.
Z
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
