NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RN10200 not visible
hi, power LED on. strat up blink few second only. network port green color LED blinking. but no ip or discover to RAIDar how to pix that
i have using usbrecovery.v2.0.T14.support. USB flash and problem solved
Is this a new system setup?
Are there disks installed in the RN102?
StephenB wrote:Is this a new system setup?
Are there disks installed in the RN102?
no. i have take ip image from my router.
no didn't install disk
sanjeewakuku wrote:
StephenB wrote:Is this a new system setup?
Are there disks installed in the RN102?
no. i have take ip image from my router.
no didn't install disk
I think it will not pick up IP address unless there is at least one disk inserted.
I think it will not pick up IP address unless there is at least one disk inserted.
i think OS not boot. i have plug the power after power LED blink few second and LED stable on. can i get advice how to install OS using USB flash drive
Please try the following:
- power off the device
- inster one clean drive
- boot it again
- check on your router or RAIDar what is the IP of this router
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
