NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN104 – ReadyNAS 100 Series 4
Now that I have updated to the latest firmware 6.10.10, I cannot update my Plex software. I get the following error. (app installation is no longer supported with app upload or available apps) First,...
NimoUnderGround wrote:
I was thinking about upgrading to a new ReadyNAS,
You won't find one... Netgear is exiting the business, and hasn't introduced a new platform since 2017. So you should look elsewhere.
NimoUnderGround wrote:
First, why would they do this? .
They haven't said, but I think it is because the debian linux version used by the NAS has been retired/archived.
NimoUnderGround wrote:
Can I roll back the firmware version? If so, how?
Download the ARM zip file from
and extract the image.
Then go to the system->settings->update section of the web ui, and click on "install firmware".
Thanks for the help and the information. I was able to roll back and upgrade my Plex Server. Thanks again, much appreciated.
NimoUnderGround wrote:
Thanks for the help and the information. I was able to roll back and upgrade my Plex Server. Thanks again, much appreciated.
At some point in the future you will likely also need the mods in post 37 here
You can install these with winscp if you aren't comfortable with the linux command line. Enable ssh in the NAS, and use SFTP as the protocol in winscp. Use root as the username with the NAS admin password.
Will do. Thanks again.
I repaired an RN 104, previously installed with 6.5.2, then tried an update to 6.10.9 in the WEBUI, message with server error, so failed. Tried USB recovery on 6.10.9 - also failed. thereafter https://kb.netgear.com/29974/ReadyNAS-OS-6-RN100-RN2120-cannot-update-due-to-invalid-checksum
Nas is now on 6.10.10
How do I get to 6.10.09?
The log always says Invalid Checksum and USB Recovery failed, webui also shows Invalid Checksum at booting
with SSH ? >> put the firmware to root path andecho /root/ReadyNASOS-6.10.9-arm.img > /etc/.flash_update also invalid Checksum at Boot
i have also a RN102 there is the downgrade possible from 6.10.09 to 6.10.08
a_Fred wrote:
I repaired an RN 104, previously installed with 6.5.2, then tried an update to 6.10.9 in the WEBUI, message with server error, so failed. Tried USB recovery on 6.10.9 - also failed. thereafter https://kb.netgear.com/29974/ReadyNAS-OS-6-RN100-RN2120-cannot-update-due-to-invalid-checksum
Nas is now on 6.10.10
Were you able to install the deb file in the workaround?
If not, try installing it as if it were a firwmare update.
Yes. the Update with the .deb App worked fine to 6.10.10
but now on 6.10.10 no App-Support that's why I want to go back to 6.10.09
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
