NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN104 – ReadyNAS 100 Series 4
Now that I have updated to the latest firmware 6.10.10, I cannot update my Plex software. I get the following error. (app installation is no longer supported with app upload or available apps) First,...
I repaired an RN 104, previously installed with 6.5.2, then tried an update to 6.10.9 in the WEBUI, message with server error, so failed. Tried USB recovery on 6.10.9 - also failed. thereafter https://kb.netgear.com/29974/ReadyNAS-OS-6-RN100-RN2120-cannot-update-due-to-invalid-checksum
Nas is now on 6.10.10
How do I get to 6.10.09?
The log always says Invalid Checksum and USB Recovery failed, webui also shows Invalid Checksum at booting
with SSH ? >> put the firmware to root path and
| echo /root/ReadyNASOS-6.10.9-arm.img > /etc/.flash_update |
also invalid Checksum at Boot
i have also a RN102 there is the downgrade possible from 6.10.09 to 6.10.08
a_Fred wrote:
I repaired an RN 104, previously installed with 6.5.2, then tried an update to 6.10.9 in the WEBUI, message with server error, so failed. Tried USB recovery on 6.10.9 - also failed. thereafter https://kb.netgear.com/29974/ReadyNAS-OS-6-RN100-RN2120-cannot-update-due-to-invalid-checksum
Nas is now on 6.10.10
Were you able to install the deb file in the workaround?
If not, try installing it as if it were a firwmare update.
Yes. the Update with the .deb App worked fine to 6.10.10
but now on 6.10.10 no App-Support that's why I want to go back to 6.10.09
a_Fred wrote:
Yes. the Update with the .deb App worked fine to 6.10.10
but now on 6.10.10 no App-Support that's why I want to go back to 6.10.09Note there is a workaround - you can still install the ReadyNAS app deb files by uploading them as if they were firmware updates. And you can install using ssh.
Either way, there are changes you need to make to the apt configuration with ssh. That is because Jessie (Debian 😎 has been deprecated, so the libraries have been archived. There is a very long thread on the topic here:
Post 37 is a good one to look at.
That said, you should be able to downgrade. So I am puzzled on what is going on there.
i have copyd the apt.conf and sources.list and with SSH apt-get update
Firmware in GUI update 6.10.09 is uploadet then Reboot
no downgrade is possible, the Checksum always make's an errorhere my initrd.log: [2024/09/09 09:11:49 UTC] Factory default initiated on ReadyNASOS 6.10.10 (ReadyNASOS).
[2024/09/09 09:21:24 UTC] Update image checksum mismatch (c4c8da649c5a03e07b191af8ab4db23f/333d1d3bf368fed782207c2e6ddec4f1)!
[2024/09/14 15:45:37 UTC] Update image checksum mismatch (1bdec2f5d68a618b914eb6dac752f18b/a73a7a7b9c7b422873eb3c7a3d014184)!
[2024/09/15 19:09:25 UTC] Could not find update image!
[2024/09/15 19:13:27 UTC] Update image checksum mismatch (1bdec2f5d68a618b914eb6dac752f18b/10d0a7181819c7bf0d83e4ca92f01373)!
[2024/09/16 18:25:02 UTC] Update image checksum mismatch (c4c8da649c5a03e07b191af8ab4db23f/5bb19308b4de137ce57c2060119c454d)!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
