Hey guys, I'm copying a share from one volume to a new volume through SSH using MC (Midnight Commander) and I'm getting an avg of 6.33MB/s. Going to take 35mins or so to copy 14GB. I know this unit is a bit slow for ram/cpu but this seems like a 10th of what it should be able to do. Thoughts before I move onto the other 5 TERABYTES?

Of course it should be faster. What firmware are you running? Is the new volume still syncing? Were you seeing any performance issues on the old volume before? Have you checked Disk Health? Is AntiVirus running?

- Firmware is 6.9.5 - Syncing? Well the new volume is a single empty disk. I suppose the NAS might be formatting it in the background?! Not sure. - It always seemed slow to transfer stuff over the network but I was never copying a file from one volume to another to benchmark it. - I have not checked Disk Health, I'm certainly hoping this brand new drive is A-OK. - No anti-virus.

Hi WiredRacing A new disk might be fine and dandy until the courier starts bouncing it around in the back of the truck :) This could be a disk issue. Can you download the logs and find the log file: disk_info.log Post the content of that log-file here (masking any serial numbers of your disk). Thanks

True and doesn't seem to be... Device: sdc Controller: 0 Channel: 0 Model: WDC WD30EFRX-68EUZN0 Serial: xxxxxxxxxxxxxxx Firmware: 82.00A82 Class: SATA RPM: 5400 Sectors: 5860533168 Pool: NAS1 PoolType: RAID JBOD PoolState: 2 PoolHostId: 2fe541ba Health data ATA Error Count: 0 Reallocated Sectors: 0 Reallocation Events: 0 Spin Retry Count: 0 Current Pending Sector Count: 0 Uncorrectable Sector Count: 0 Temperature: 41 Start/Stop Count: 11283 Power-On Hours: 28919 Power Cycle Count: 8 Load Cycle Count: 11481 Device: sdb Controller: 0 Channel: 1 Model: WDC WD30EFRX-68EUZN0 Serial: xxxxxxxxxxxxxxx Firmware: 82.00A82 Class: SATA RPM: 5400 Sectors: 5860533168 Pool: NAS1 PoolType: RAID JBOD PoolState: 2 PoolHostId: 2fe541ba Health data ATA Error Count: 0 Reallocated Sectors: 0 Reallocation Events: 0 Spin Retry Count: 0 Current Pending Sector Count: 0 Uncorrectable Sector Count: 0 Temperature: 42 Start/Stop Count: 13812 Power-On Hours: 28919 Power Cycle Count: 8 Load Cycle Count: 14029 Device: sda Controller: 0 Channel: 2 Model: WDC WD100EFAX-68LHPN0 Serial: xxxxxxxx Firmware: 83.H0A83 Class: SATA RPM: 5400 Sectors: 19532873728 Pool: NAS PoolType: RAID JBOD PoolState: 2 PoolHostId: 2fe541ba Health data ATA Error Count: 0 Reallocated Sectors: 0 Reallocation Events: 0 Spin Retry Count: 0 Current Pending Sector Count: 0 Uncorrectable Sector Count: 0 Temperature: 41 Start/Stop Count: 1 Power-On Hours: 5 Power Cycle Count: 1 Load Cycle Count: 1

Device: sdcController: 0Channel: 0Model: WDC WD30EFRX-68EUZN0Serial: xxxxxxxxxxxxxxxFirmware: 82.00A82Class: SATARPM: 5400Sectors: 5860533168Pool: NAS1PoolType: RAID JBODPoolState: 2PoolHostId: 2fe541baHealth data ATA Error Count: 0Reallocated Sectors: 0Reallocation Events: 0Spin Retry Count: 0Current Pending Sector Count: 0Uncorrectable Sector Count: 0Temperature: 41Start/Stop Count: 11283Power-On Hours: 28919Power Cycle Count: 8Load Cycle Count: 11481 Device: sdbController: 0Channel: 1Model: WDC WD30EFRX-68EUZN0Serial: xxxxxxxxxxxxxxxFirmware: 82.00A82Class: SATARPM: 5400Sectors: 5860533168Pool: NAS1PoolType: RAID JBODPoolState: 2PoolHostId: 2fe541baHealth data ATA Error Count: 0Reallocated Sectors: 0Reallocation Events: 0Spin Retry Count: 0Current Pending Sector Count: 0Uncorrectable Sector Count: 0Temperature: 42Start/Stop Count: 13812Power-On Hours: 28919Power Cycle Count: 8Load Cycle Count: 14029 Device: sdaController: 0Channel: 2Model: WDC WD100EFAX-68LHPN0Serial: xxxxxxxxFirmware: 83.H0A83Class: SATARPM: 5400Sectors: 19532873728Pool: NASPoolType: RAID JBODPoolState: 2PoolHostId: 2fe541baHealth data ATA Error Count: 0Reallocated Sectors: 0Reallocation Events: 0Spin Retry Count: 0Current Pending Sector Count: 0Uncorrectable Sector Count: 0Temperature: 41Start/Stop Count: 1Power-On Hours: 5Power Cycle Count: 1Load Cycle Count: 1

RN104 - Really Slow Copy Speeds | NETGEAR Communities

16 Replies

Replies have been turned off for this discussion

StephenB
Guru - Experienced User
Mar 14, 2019
Of course it should be faster.

What firmware are you running?

Is the new volume still syncing?

Were you seeing any performance issues on the old volume before?

Have you checked Disk Health?

Is AntiVirus running?
- WiredRacing
  Aspirant
  Mar 14, 2019
  - Firmware is 6.9.5
  
  - Syncing? Well the new volume is a single empty disk. I suppose the NAS might be formatting it in the background?! Not sure.
  
  - It always seemed slow to transfer stuff over the network but I was never copying a file from one volume to another to benchmark it.
  
  - I have not checked Disk Health, I'm certainly hoping this brand new drive is A-OK.
  
  - No anti-virus.
  - Hopchen
    Prodigy
    Mar 14, 2019
    Hi WiredRacing
    
    A new disk might be fine and dandy until the courier starts bouncing it around in the back of the truck :)
    
    This could be a disk issue. Can you download the logs and find the log file: disk_info.log
    
    Post the content of that log-file here (masking any serial numbers of your disk).
    
    Thanks
WiredRacing
Aspirant
Mar 15, 2019
I keep pasting this info in the thread and the post keeps disappearing.

Anyhow there's no errors for that (any) drive in the log file. If someone can help me understand why I can't paste the contents in the message, then perhaps I can do that.
- StephenB
  Guru - Experienced User
  Mar 15, 2019
  WiredRacing wrote:
  
  If someone can help me understand why I can't paste the contents in the message, then perhaps I can do that.
  
  You triggered the automatic spam filter (that happens sometimes). I've released one of the posts.

Forum Discussion

RN104 - Really Slow Copy Speeds

16 Replies

Related Content

formatting my netgear rn104

ReadyNAS RN104 Drive degraded, ATA error

ReadyNAS RN104 fresh setup to replace Seagate NAS

Wifi 7 speeds vs Wifi 6E speeds (Samsung Phones)

rn104 network issue

NETGEAR Academy

ProSupport for Business