NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN104 Could not properly extract, fireware checksum error
Hi, I've got a little problem with my NAS and an upgrade to 6.2.2.(4x1T hdd in RAID10 - 10% free space in time of upgrade - update) After restart LED shows this information: 1. Booting... 2. Che...
Since you already did a factory reset on your RN104, try to initially set it up with only 1 disk inside. Try these steps:
1. Insert 1 disk then perform a factory reset.
2. Download again the FW v6.2.2 from this link below (its possible that what you have downloaded earlier is corrupted that is why it failed to update):
http://www.downloads.netgear.com/files/ ... .2-arm.zip
Note: Be sure to unzip it before uploading it to your NAS.
3. Try to update the FW to v6.2.2 and check if it will be successful.
1. Insert 1 disk then perform a factory reset.
2. Download again the FW v6.2.2 from this link below (its possible that what you have downloaded earlier is corrupted that is why it failed to update):
http://www.downloads.netgear.com/files/ ... .2-arm.zip
Note: Be sure to unzip it before uploading it to your NAS.
3. Try to update the FW to v6.2.2 and check if it will be successful.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
