NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN104 Keeps crashing/hanging
Hi I recently bought a RN104 to use as an iSCSI target for a small 2 node VMWare cluster hosting 5 vms. Each host has 2 separate gigabit nics with jumbo frames enabled to give dual path access to ...
I wasn't aware that downloading the logs gave you the full system logs!
These have been downloaded and emailed as per the instructions. It may be down to performance in which case I may have to migrate some guests off the cluster or buy another NAS to spread the load. I have already upgraded to 6.1.9 rc8 and disabled sync write to see if this helps so will monitor for it happening again.
The UPS issue still exists. When trying to add it via the web interface as a snmp ups, this is the error that I am getting
Failed to communicate with UPS.<br />Error in during post proc
Code: 17003030001
Datetime: 08:16:31 08/02/2014
These have been downloaded and emailed as per the instructions. It may be down to performance in which case I may have to migrate some guests off the cluster or buy another NAS to spread the load. I have already upgraded to 6.1.9 rc8 and disabled sync write to see if this helps so will monitor for it happening again.
The UPS issue still exists. When trying to add it via the web interface as a snmp ups, this is the error that I am getting
Failed to communicate with UPS.<br />Error in during post proc
Code: 17003030001
Datetime: 08:16:31 08/02/2014
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
