NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RN10400 Error do_exit+8ec
Upgrade the firmware of my RN10400 version 6.5.1 to 6.5.2.
Error: + do_exit_8ec; Power LED flashes. Reboot menu, none of the functions is recognized,the USB port either, trials and several key disk f...
Since the beginning, I said that with this error the USB port was not recognized, nor any function of the reboot.
Thus all that you say are not a solution.
The one here is thus that I found to end this exchange.
I found the way(means) to get back the contents of my disks.I bought a NAS of a mark having better reputation.
I put the RN104 in the trash can.
On the sector of the Private individuals, needs not to take them too much for imbecile ones.Goodbye.
Instead of the production ARM firmware put the ARM firmware image from ReadyNASOS 6.6.1-T220 (Beta 3) on the USB key. Proceed to attempt to boot off the USB key to do the USB Boot Recovery.
Since the beginning, I said that with this error the USB port was not recognized, nor any function of the reboot.
Thus all that you say are not a solution.
The one here is thus that I found to end this exchange.
I found the way(means) to get back the contents of my disks.
I bought a NAS of a mark having better reputation.
I put the RN104 in the trash can.
On the sector of the Private individuals, needs not to take them too much for imbecile ones.
Goodbye.
That's disappointing. Your 3 year limited hardware warranty had not yet expired so I could have recommended as a last resort that support do an RMA if all else failed.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
