NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN204 issues with 1 disk
Hi All,
My RN204 has been workign perfectly for well over 5 years so I was long overdue a problem ha ha
A little extra info:-
Disk 1 - 2TB
Disk 2 - 2TB
Disk 3 - 3TB
Disk 4 - 2TB...
XRAID won't shrink an array, it will only expand one.
So you can't replace a 3 TB drive with anything smaller.
- Hi and thanks for posting, even if there is 2.5TB free space across all 4 disks?
Actually, since only 2TB of the 3TB is actually in use, the array doesn't need to shrink and I believe you can replace it with a 2TB. I think I did that experiment back when I got my last new NAS and tried out a lot of stuff. Unfortunately, I'm not sure enough to recommend you buy a 2TB to use. But if you already have the 2TB, then do try it and let us know what happened.
- Thanks for your reply, so once the data is recover off the damaged 3TB drive, I just leave the system powered on, remove the 3TB drive and then just swap it for a 2TB drive or larger and then the system will just incorporate that into the xraid setup and my data will be there as it was before?
I'm just a little unclear on the procedure as it's been a long time since I put it all together and set it up and it's mainly used only for file storage and streaming of my own media
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
