NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN212 can't seen by time machine anymore
Dear forum experts, my RN 212 vers. 6.10.10 run flawless for a long time... Raidar vers. 6.5.0 can still see the NAS and tell me everything OK, aka two green light for the two 4TB disc bays. ...
Can you get to the NAS admin interface? Yes, changing your WiFi can make a difference if it's also the router. If your NAS was set up with a static IP saved within it, that IP may not be (probably isn't, given your issue) in the address pool of the new router. If it was using DHCP (whether or not with a reserved address in the old router) , then it undoubtedly simply has a new IP address, which may or may not be in the same IP range as your old one.
What is the IP address of your Mac, and what IP address is reported for the NAS in RAIDar?
What is the IP address of your Mac, and what IP address is reported for the NAS in RAIDar?
Also, can you access the shares on the NAS using the Mac?
Hi Stephen, thank you for sharing your questions.
yes, I could access the NAS admin page via the browser.
mac IP is ....108 and my NAS IP is ...106
Hi Sandshark,
thank you for your contribution.
yes, I could access the NAS admin page via the browser and i can see a single Volume there (3,02 TB free of 3,63 TB).
The iMac IP is ....108 and my NAS IP seen in Raidar is ...106 and the Router has...1
The DNS server is 10.0.0.138
Where may I see if the NAS runs on static IP, or not?
What i didn't understand is:
There are no figures in the network setting flag of the NAS: Rout and Proxy.The spaces for adapter are all empty?Ip-address, subnetmask, gateway and adapter all all empty?
Where may I see if the NAS runs on static IP, or not?
Open the NAS web ui, and select the network tab. Then select the settings wheel for the ethernet adapter you are using, and finally select the IPv4 tab.
If you using DHCP (which you likely are), you will see "Using DHCP" in the "configure pulldown". If you instead see "Static", the system is using a static IP (configured in the NAS itself).
Note this is not the same as a "reserved" IP address. That uses DHCP, but is reserved for the NAS in the DHCP server.
There are no figures in the network setting flag of the NAS: Routes and Proxy.
That is on the advanced setting page. and is usual. You normally won't have anything there.
The spaces for adapter are all empty?Ip-address, subnetmask, gateway and adapter all all empty?
Normally the IP address is shown under the adapter icon on the networks tab (along with the MTU and the ethernet speed). IP address, subnet mask and gateway ("router") are on the IPv4 tab in the adapter settings wheel.
TimeMachine should backup an internal SSD with 2TB
Now it reports "Communication error, check DNS and Proxy settings"You might double-check that Time Machine is still enabled on the NAS backup page.
Is the Mac set up to back up to the NAS hostname? Or is it set up to back up to the NAS ip address?
Thank you very much, to keep on trying to help, which i appreciate very much !
Uh, your detailed questions leads on thin ice for me...
OK, i try my best to give a sound answer:
time machine still can't see the NAS
the network tab you mentioned - see this screenshot... it looks like, i'm not entitled to upload files here.
I'm describing what we see on networks tab:
iP4 tab: use DHCP
address: ...111
subnetmask..255.0
Router... .1
DNS-SERVER 10.0.0.138
Path local domain: this one is empty
NAS failure is reading:
no hostname found, communication failure. Check link to network DNS- and Proxy Settings.
Where should i look now?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
