Forum Discussion

Aspirant

Nov 02, 2015

Solved

RN2120 6.4.0 non reponsive

The RN2120 is a bit of a pain because it's got no real interface beyond the networking. I'll go through my story and if anyone can see a fix or something I've missed please let me know. Was...

Installation & Upgrade

qyiet
Nov 16, 2015
Took some time, and two OS reinstalls, but with the help of netgear support we were able to get the NAS back up again.

qyiet

Aspirant

Nov 04, 2015

Looks like my reply got lost someone on the intertubes. Retyping it.

I was able to get to the various flashing LED boot menu follwing the instructions BrianL linked, and select the "Volume Read Only" mode without issue.

It appears to have booted after that, but I'm at a loss as what the next setup should be. 30min after allowing selecting the reboot I've not been able to access the device via http, https, ping, ssh, telnet or smb on either of the IP addresses that the router gives it.

I've run RAIDar and it didn't find it either, however I don't count that as a proper test as it wasn't run from the same subnet so was probably pointless. (physical limitiation I'll be able to overcome in a few hours and retest)

So.. I'm kind of stuck for as to 'what to do next'

Qyiet

mdgm-ntgr

NETGEAR Employee Retired

Nov 04, 2015

You might wish to open an online chat support case.

qyiet
Aspirant
Nov 10, 2015
Currently progressing the case with netgear support, will update the thread once a resolution is reached
- BrianL2
  NETGEAR Employee Retired
  Nov 10, 2015
  Hi qyiet,
  
  Thanks for giving feedback. Just let us know if support has provided a fix or a resolution to your problem.
  
  Kind regards,
  
  BrianL
  NETGEAR Community Team
  - qyiet
    Aspirant
    Nov 16, 2015
    Took some time, and two OS reinstalls, but with the help of netgear support we were able to get the NAS back up again.