RN214 btrfs corruption forced readonly

I'm getting BTRFS corruption...

 

So it started with turning on teaming for the NIC cards in network settings. The device locked up and I had to force restart it. When it did, it started a rebalance that took about 20 hours. When it was done, I noticed that the system was much slower than before.

 

So I searched around here in this forum and there was a thread about doing a full rebalance to fix the issue. I'm sorry I do not remember the command, but it was to echo to a file and reboot.

 

It ran for 2 days or so. When I came back from work today it was done. So I mounted the drives on my laptop and as I started using it I noticed that the file system was read only. dmesg showed:

 

BTRFS critical (device md126): unable to find logical 407721705472 len 4096

 

and:

 

[<c001524c>] (unwind_backtrace) from [<c001173c>] (show_stack+0x10/0x18)

 

I decided to reboot again to see if that may fix it. It rebooted successfully and dmesg showed not errors. I could right to the filesystem. For a bit. And then it's hapenned again. I've shutdown the system, and would appreciate all support to hopefully fix this issue.

 

Thanks.