NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
kevinfor2014
Apr 21, 2017Guide
RN716X - Boot hangs with PCPU free_area+1 at 24%
Factory Reset NAS... Install 6.7 Firmware... add one drive resync/reshape OK ... Repeat process adding more drives one at a time.. Resync/reshape OK.. (this takes 7 Days) all shares/data accessable -...
- Apr 22, 2017
since there was no data on the NAS.. we pulled out 2 of the smallest HD.. & replaced with 10TB... factory reset & that resolved the issue.. I was only concerned this was a hardware error message & later learned from the dmesg.log it was not.. so the issue is resolved ... thanks
mdgm-ntgr
Apr 22, 2017NETGEAR Employee Retired
Can you boot to volume read-only mode successfully?
If so can you download your logs and send them in (see the Sending Logs link in my sig)?
- kevinfor2014Apr 22, 2017Guide
since there was no data on the NAS.. we pulled out 2 of the smallest HD.. & replaced with 10TB... factory reset & that resolved the issue.. I was only concerned this was a hardware error message & later learned from the dmesg.log it was not.. so the issue is resolved ... thanks
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!