NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
kevinfor2014
Apr 21, 2017Guide
RN716X - Boot hangs with PCPU free_area+1 at 24%
Factory Reset NAS... Install 6.7 Firmware... add one drive resync/reshape OK ... Repeat process adding more drives one at a time.. Resync/reshape OK.. (this takes 7 Days) all shares/data accessable -...
- Apr 22, 2017
since there was no data on the NAS.. we pulled out 2 of the smallest HD.. & replaced with 10TB... factory reset & that resolved the issue.. I was only concerned this was a hardware error message & later learned from the dmesg.log it was not.. so the issue is resolved ... thanks
mdgm-ntgr
Apr 22, 2017NETGEAR Employee Retired
Can you boot to volume read-only mode successfully?
If so can you download your logs and send them in (see the Sending Logs link in my sig)?
kevinfor2014
Apr 22, 2017Guide
since there was no data on the NAS.. we pulled out 2 of the smallest HD.. & replaced with 10TB... factory reset & that resolved the issue.. I was only concerned this was a hardware error message & later learned from the dmesg.log it was not.. so the issue is resolved ... thanks
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!