Forum Discussion

Aspirant

Sep 12, 2017

Solved

RND2000 v2

Hi. I wanted to insert second hdd to nas. Raidar 6.3 cant do raid 0 or jbod, I had to use raidar 4.3.8. But after reboot second hdd lost from system. After that, I insert hdd in PC to check for corru...

Adding Disks

Other Discussions

Papson
Sep 13, 2017
I find the answer by typing "netgear lock hdd" in google

Papson

Aspirant

Sep 13, 2017

Nas do erasing more then 9 hours, the lights is on, but raidar did not see the device.

Papson

Aspirant

Sep 13, 2017

I find the answer by typing "netgear lock hdd" in google

Papson
Aspirant
Sep 13, 2017
But this solution not work - I need to boot it into tech support mode, RAIDar should give you a 5 digit codea and after then I need a password from Netgear expert or some one from netgear support.
- Papson
  Aspirant
  Sep 13, 2017
  Or maybe problem with device - its do reset aftere every reboot.
  - Papson
    Aspirant
    Sep 13, 2017
    And I cant install ssh - its need reboot :(
- StephenB
  Guru - Experienced User
  Sep 13, 2017
  Papson wrote:
  
  But this solution not work - I need to boot it into tech support mode, RAIDar should give you a 5 digit codea and after then I need a password from Netgear expert or some one from netgear support.
  
  Right. Do you know how to use Linux shell commands?
  - Papson
    Aspirant
    Sep 13, 2017
    StephenB wrote:
    Papson wrote:
    But this solution not work - I need to boot it into tech support mode, RAIDar should give you a 5 digit codea and after then I need a password from Netgear expert or some one from netgear support.
    Right. Do you know how to use Linux shell commands?
    Yes.