NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RND2000v2 - Network Port Issues
Hi Team, I've had my RND2000v2 turned off for about a year as I havn't needed to access it. Now when it starts up I'm not getting any lights appear at the ethernet port when I've got a network cabl...
Hi Stephen,
Thanks for the fast reply.
I don't think it's a power issue though as the NAS powers up.
Even with no drives I get absolutley no network connectivity from it at all.
Doesn't matter if I have no drives in, drive 1 in, drive 2 in, or both drives in I get three
fast flashes of the blue power button followed by two slow flashes of the drive 1 light.
But that still happens even if no drive 1 in there or any drives at all.
Ultimately that's what I'm trying to figure out what's wrong with the drives, but I can't connect
to the device to work that out.
jaimierodd wrote:
Doesn't matter if I have no drives in, drive 1 in, drive 2 in, or both drives in I get three
fast flashes of the blue power button followed by two slow flashes of the drive 1 light.
But that still happens even if no drive 1 in there or any drives at all.
That particular pattern means "no disks detected". So if that happens with disks installed, then there are multiple problems.
How old is the NAS? I think warranty should be 3 years for the original purchaser.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
